TM 11-5860-200-12
3-23. Lubrication.
The ALT does not require lubrication.
3-24. Checkout.
Operation of the ALT is verified by performing self-test procedures (para 3-10).
3-25. Preparation for Shipment.
When receiving or shipping equipment, always check equipment against the packing slip to see if the shipment is
complete.
a.
Before releasing latches and opening the lid. press the pressure equalizer (3) valve located on the side of the
transit case.
b.
Unhook latches (2) securing transit case lid (1).
c.
Lift lid carefully from transit case base (4).
CAUTION
Use care when handling receiver. It contains delicate instruments.
The receiver dome is made of glass and should be protected at all times. Do not touch
glass with bare fingers. Use plastic gloves (item 10, App D). Skin oils will damage the
optical surface.
d.
Carefully lower receiver (6) on container base (5) and secure with four bolts and washers (7).
e.
Install transit case lid (1) on transit case base (4).
f.
Secure latches (2).
3-34