Section I. REPAIR PARTS, SPECIAL TOOLS, TMDE
AND SUPPORT EQUIPMENT
3-1. Common Tools and Equipment
For authorized common tools and equipment refer to the Modified Table of Organization
and Equipment (MTOE) applicable to your unit.
3-2. Special Tools, TMDE, and Support Equipment
Refer to the Maintenance Allocation Chart, Appendix B for special tools or equipment that
are required for organizational and direct support maintenance.
3-3. Repair Parts
Repair parts are listed and illustrated in the repair parts and special tools list (RPSTL) TM
11-6625-2638-23P organizational and direct support maintenance for the Airborne Laser
Tracker Test Set, AN/AAM55.
Section Il. SERVICE UPON RECEIPT
a. Remove the test set or test stand from its container.
b. Press the automatic valve core located on the side of the test set case.
c. Unhook latches securing lid and lift lid up,
3-5. Checking Unpacked Equipment
a. Inspect the equipment for damage. If the equipment has been damaged, report
the damage on SF 364 (Report of Discrepancy (ROD)).
b. Check the equipment against the packing slip to see if the shipment is complete.
Report all discrepancies in accordance with the instructions in DA Pam
738-750. The equipment should be placed in service even though a minor
assembly or part that does not affect proper functioning is missing.
c. Check the equipment for modifications. (Equipment which has been modified will
have the MWO number on the front panel near the name plate.)
d. Ensure that all currently applicable MWO'S have been applied. (Current MWO'S
applicable to the equipment are listed in DA Pam 310-1.)