Table 2-3. Test Set Troubleshooting - Continued
a. Connect DVM (DC Mode) between J4-K (+) and J5-B (-).
b. Place AZIMUTH GAIN switch to HIGH.
19 to 25 vdc.
c. Place AZIMUTH GAIN switch to LOW
0 vdc (open circuit).
19 to -25 vdc.
a. Place the LED PRF and MLO switches to ON.
SCOPE as follows:
A to J4-i
B to J4-j
b. Verify the Pulse widths and levels of the following wave forms.