3-13. Replacing Laser Simulator Mode Switch (S1) (fig. 3-5)
a. Ensure mode switch (1) is OFF,
DO NOT DISTURB LED and Mounting Assembly (7). The LED is precision aligned and
must not be disturbed.
d. Unsolder wires from switch (6) and label for identification.
e. Remove nut (2) and switch (6).
f. Install new switch (6) with nut (3) and keyed washers (4 and 5) and secure with nut (2).
g. Connect and solder wires to switch as labeled.
i. Ensure mode switch is OFF.
Figure 3-5. Laser Simulator Mode Switch.