OF MAJOR COMPONENTS.
Bucket-ProTM System is equipped with a Dual-Axis Tilt Sensor to compensate for frame
pitching and rolling during operation. Dual-Axis Tilt Sensor must be allowed to reach
operating temperature to function accurately. Warm-up for Dual-Axis Tilt Sensor takes
approximately 10 minutes after Bucket-ProTM System is powered up.
REMOTE CONTROL BOX. Remote Control Box contains microprocessors
ANGLE SENSORS. Three Angle Sensors measure boom, stick, and bucket angles, and feed data to
Remote Control Box.
DUAL-AXIS TILT SENSOR. Dual-Axis Tilt Sensor constantly compensates for movements so that
displayed elevation and grade references remain set up as entered. Dual-Axis Tilt Sensor
constantly compensates for the EM2E-24 Electric Mast rocking out of plumb as the HYEX pitches
and rolls during digging cycle.
GRAPHIC DISPLAY. Graphic
with five buttons interfaces
with all Bucket-ProTM
System features and functions.
EM2E-24 ELECTRIC MAST. The EM2E-24 Electric Mast is a telescoping receiver mount driven by
an electric motor.
SHOCK MOUNT. Attaches to the Bucket-ProTM System and protects from vibration.
1145-2 TRANSMITTER LASER REFERENCE SYSTEM.
(Not Shown) Bucket-ProTM System Laser
Reference System allows trenching over long distances without having to benchmark Bucket-ProTM
System each time HYEX is moved.