Table 5-3. 1145-2 Laser Transmitter Troubleshooting
Test or Inpsection
Connecting to 24 Vdc will damage laser. Ensure external power is 12 Vdc. Failure to
comply will result in damage to equipment
Verify Battery Low Voltage Indicator Lamp (1) is not on.
If Battery Low Voltage Indicator Lamp (1) is on, recharge internal Battery (2) or
hook up to 12-Vdc external Battery using cables provided.
Ensure Control Switch (3) is in AUTO position.
Wait for a minute until Auto Mode Indicator Lamp (4) stops flashing.
Laser beam should now be lit. Check it with 1275 Laser Receiver (Para 5-4).