TM 5-6675-348-13&P
c.
Install.
NOTE
Step (1) applies to both sides of the machine. The right side is shown.
(1)
Install Remote Interface Box (28) under
130G Grader's Gooseneck (19) with two
washers (26), bolts (25), and Remote Box
Mounting clamp (27).
(2)
Tighten bolts (25).
(3)
Remove Connectors (22), (23), and (24) from
Connector Holders (29), (30), and (31).
(4)
Connect Connectors (22), (23), and (24) to
Remote Interface Box (28).
(5)
Remove Mainfall Slope Sensor Cable (15)
from Connector Holder (17).
(6)
Remove two socket head screws (20) from
Mainfall Slope Sensor Mounting
Plate (21).
3-38
Previous Page
