Unsafe welding practices can cause serious injury from fire, explosions, or harmful agents.
Allow only authorized personnel to weld or cut metals, and follow safety precautions in
TC 9-237. Protective clothing and goggles must be worn, adequate protective equipment
must be used, a suitable fire extinguisher must be kept nearby, and requirements of
TC 9-237 must be strictly followed. Failure to comply may result in serious injury or death
(1) Weld supplied Rigid Mast Mount (1),
holes up, to right side of Bowl (2).
(2) Install Connector Holder (3) and
screw (4) on Display Mount (5).
(3) Tighten screw (4).
The Display Mount should be
mounted in clear view from the
Steps (4) through (10) require the
aid of an assistant.
Position connector holder towards
front of Scraper.
(4) Place Display Mount (5) on Hood (6).