Beeper < (Cross-Slope). Two short beeps are emitted when cross-slope-controlled side of blade
remains in a fine correction for more than 2 seconds. If a medium or coarse correction signal is
indicated, two short beeps are emitted with no delay. This alerts the Operator that the slope has
not been cut correctly. A second pass or ripping the material may be required to cut to grade.
Slope. % Slope or Rise/Run Display. Allows the Operator to select how cross-slope is displayed in
display window. Options are percent slope (5) or rise/run (e.g., 1/4 in. per foot (6 mm per meter) is
displayed as 1/4" in English; 6 mm per meter is displayed as 6 mm/m metric).
Test. Activates all LCD segments and LED indicator lights. Visual display shows any missing LCD
segments or burned-out LED indicators. The test feature also displays errors that may have occurred.
PROGRAMMING BLADE PRO MOTOR GRADER CONTROL SYSTEM USER OPTIONS.
SET-UP can be exited from any point in the SET-UP menu by positioning the OFF/ON/SET-
UP switch back to the ON position.
Switches used in SET-UP Mode.
To enter SET-UP, position the OFF/ON/
SET-UP switch (1) to SET-UP position.
Left Increase/Decrease switch controls
the menu displayed in left display
Toggle left Increase/Decrease switch (2)
down to move next item in menu.
Toggle left Increase/Decrease switch (2) up to move back to last displayed item.
Use left RESET Button (3) to enter or exit selected menu displayed in left display window.
Right Increase/Decrease switch (4) changes feature from ON to OFF or value displayed in
right window (for example: ON to OFF or 1.25 to 1.26).
SET-UP can be exited from any point in the SET-UP menu by positioning the
OFF/ON/SET-UP switch (1) back to the ON position.