TM 11-6625-2638-30
2-22. Lamp Holder Replacement (fig. 2-5)
a. If necessary to gain access to lamp holder, remove circuit card (para 2-17),
b. Tag wires for reinstallation and unsolder wires.
c. Remove attaching hardware (1).
d. Replace lamp holder (2) using attaching hardware (1).
e. Reconnect and solder wires.
f. To be sure, check continuity reinstalled wires (table 2-4 or 2-5).
g. If removed, install circuit card (para 2-18).
h. Install test set into case (para 2-16).
E L8TR027
Figure 2-5. Lamp Holders.
2-36
Previous Page
