TM 5-6675-348-13&P
EQUIPMENT IMPROVEMENT REPORT AND MAINTENANCE SUMMARY (EIR MS).
The quarterly Equipment Improvement Report and Maintenance Digest (EIR MD), TB 43-0001-62 series,
contains valuable field information on equipment covered in this manual. Information in the TB 43-0001-62
series is compiled from some of the Equipment Improvement Reports that have been prepared on equipment
covered in this manual. Many of these articles result from comments, suggestions, and improvement
recommendations that were submitted to the EIR program. The TB 43-0001-62 series contains information
on equipment improvements, minor alterations, proposed Modification of Work Orders (MWOs), warranties
(if applicable), actions taken on recommendation submitted on the DA Form 2028 (Recommended Changes
and Blank Forms), and advance information on proposed changes that may affect this manual. Significant
maintenance articles, including minor alterations and field-fixes, are republished in the Equipment
Improvement Report and Maintenance Summary (EIR MS) for TACOM Equipment (TM 43-0143). Refer to
the TB 43-0001-62 series and TM 43-0143 periodically for the most current and authoritative information on
the equipment. The information will help maintenance personnel to do a better job and will advise them of
the latest changes to this manual. Also refer to DA PAM 310-1, Consolidated Index of Army Publications and
Blank Forms, and Appendix A, References, of this manual.
If your equipment needs improvement, let us know. Send us a QDR. You, the user, are the only one who can
tell us what you don't like about your equipment. Let us know why you don't like the design or performance.
Put it on an SF368 (Quality Deficiency Report). Mail it to:
Commander
U.S. Army Tank-automotive and Armaments Command
ATTN: AMSTA-TR-PQDR
Warren, MI 48397-5000
A reply will be sent to you.
Refer to TM 750-244-6 for instructions covering destruction of Army materiel to prevent enemy use.
Trimble warrants all manufactured products to be free of defects in materials and workmanship for a period
of one (1) year from the date the product is put into service. Components not manufactured by Trimble, but
sold as a part of the system, will carry a 90-day warranty, or the manufacturer warranty, whichever is greater.
Trimble warrants all installations on all heavy construction equipment to be free of defects in materials and
workmanship for a period of one (1) year from the date the installation is completed. This Installation
Warranty will apply only when Trimble personnel or authorized personnel conduct the installation.
The Trimble warranty for products and/or installation is valid worldwide.
Trimble or its Authorized Service Center will repair or replace, at its option, any defective part or component
of which notice has been given during the warranty period.
This warranty does not cover any evidence of neglect, abuse, accident, or any attempt to repair equipment by
other than factory-authorized personnel and/or parts authorized in this manual. For nonwarranty repairs, the
cost of the repair and, if required, travel and per diem expenses to and from the place where repairs are made
will be charged to the purchaser at the prevailing rates.
Previous Page
