TM 5-6675-348-13&P
SECTION III.
BUCKET-PROTM SYSTEM OPERATION
Five buttons are on the front panel of the Graphic
Display. The bottom button (1) turns the system
ON/OFF.
Four buttons access Bucket-ProTM System's
operation and setup/calibration functions.
Operation modes (2) and calibration are accessed
using a sequence of menus. Setup and calibration
menus are pass-code protected to guard against
system setup tampering.
NOTE
All numerical entry modes have
preprogrammed minimum/maximum
values that cannot be exceeded.
Menu options are selected by pointing to the entry
you want using Up and Down (↑↓) buttons (3), then
pressing ENTER button (4). Numerical entries,
when required, are also made using Up and
Down (↑↓) buttons and are confirmed by pressing
ENTER button (4).
NOTE
Optional features are enabled at
installation or by the Operator.
The Graphic Display shows informational data
depending on which features and functions are
enabled.
Commonly used features include:
(1)
Laser/Mast Indicator
(2)
Distance Markers
(3)
Slope Display
(4)
Reach Display
(5)
Elevation Display
(6)
Grade Reference Indicator
(7)
Main Grade Line
(8)
Cut/Fill Line
Previous Page
