TM 5-6675-348-13&P
(39) Install two Remote Interface Box
Mounting Brackets (50) onto Remote
Interface Box (51) with four
screws (52).
(40) Tighten screws (52).
(41) Position Remote Interface Box (51),
with Remote Interface Box Mounting
Brackets (50), under Dust
Collector (53) and 6 1/2 in. (16.5 cm)
from Bulkhead (54).
(42) Mark location for mounting holes.
(43) Drill four 1/2-in. (13 mm) holes (55).
(44) Install Remote Interface Box Mounting
Brackets (50) with four bolts (56), flat
washers (57), lockwashers (58), and
nuts (59).
(45) Tighten nuts (59).
4-50
Previous Page
