TM 5-6675-348-13&P
5-14. 1145-2 LASER TRANSMITTER, 1275 LASER RECEIVER, AND ELEVATING BASE AND
TRIPOD SYSTEM OPERATOR'S PMCS TABLE.
Table 5-1. 1145-2 LASER TRANSMITTER, 1275 LASER RECEIVER, AND
ELEVATING BASE
AND TRIPOD SYSTEM OPERATOR'S PMCS (Before/After)
Location
Item to
Not Fully Mission
Item No.
Interval
Check/Service
Procedure
Capable If:
1
Before/After
Exterior 1145-2
Wipe dirt and dust from all
Laser Transmitter
metal components with a dry
cloth.
Exterior of 1145-2
Inspect exterior of 1145-2 Laser
damaged or cracked.
cracks.
Windows are cracked,
Inspect windows for cracks,
scratched, or dirty.
scratches, and dirt. Clean
windows with clean water and a
soft cloth.
Bottom mounting
Inspect bottom mounting plate
plate is dirty.
for dirt and debris.
Knobs will not rotate
Ensure grade adjustment knobs
or adjust properly.
for "Y" and "X" axes rotate
freely and function properly.
Breather vent is
Ensure breather vent is free of
plugged.
dirt and debris.
Broken or bent pin is
Ensure power/charge connector
evident.
is free of dirt and damage.
2
Before/After
Electrical Cables
Ensure electrical cables are not
Frayed, cracked, or
frayed, cracked, or exposed.
exposed wires are
evident.
3
Before/After
Elevating Base and
Check all screws, fasteners, and
Screws, fasteners, or
Tripod
legs.
legs are missing or
damaged.
Exterior of 1275
4
Before/After
1275 Laser Receiver
Inspect 1275 Laser Receiver for
Laser Receiver is
cracks or any damage to
cracked or damaged.
exterior.
5
Before/After
1275 Laser Receiver
Inspect Grade Rod for cracks or
Grade Rod is cracked
Grade Rod
damage.
or damaged.