TM 9-1260-599-24P
Recoverability
Codes
Definition
L
Reparable item. Repair, condemnation, and disposal not authorized below depot/specialized repair
activity level.
A
Item requires special handling or condemnation procedures because of specific reasons (i.e., precious
metal content, high dollar value, critical material or hazardous material).
Refer to appropriate
manuals/directives for specific instructions.
c. National Stock Number. Indicates the National stock number assigned to the item and which will be used for
requisitioning.
d. Part Number. Indicates the primary number used by the manufacturer (individual, company, firm, corporation, or
Government activity), which controls the design and characteristics of the item by means of its engineering drawings,
specifications, standards, and inspection requirements to identify an item or range of items.
NOTE
When a stock numbered item is requisitioned, the item received may have a
different part number than the part being replaced.
e. Federal Supply Code for Manufacturer (FSCM). The FSCM is a 5-digit numeric code listed in SB 708-42 which is
used to identify the manufacturer, distributor, or Government agency, etc.
f. Description. Indicates the Federal item name and, if required, a minimum description to identify the item. When
density of equipments supported exceeds density spread indicated in the basis of issue, the total authorization is
increased accordingly.
g. Unit of Measure (U/M). Indicates the standard of the basic quantity of the listed item as used in performing the
actual maintenance function. This measure is expressed by a two-character alphabetical abbreviation (e.g., ea, in., pr,
etc.). When the unit of measure differs from the unit of issue, the lowest unit of issue that will satisfy the required units of
measure will be requisitioned.
h. Quantity Incorporated in Unit. Indicates the quantity of the item used in the breakout shown on the illustration
figure, which is prepared for a functional group, subfunctional group, or an assembly. A "V" appearing in this column in
lieu of a quantity indicates that no specific quantity is applicable (e.g., shims, spacers, etc.).
4.
Special Information.
a. Usable on codes are shown in the description column. Uncoded items are applicable to all models. Identification
of the usable on codes used in this publication are:
1-4
Previous Page
