TM 5-6675-348-13&P
NOTE
Wedges are tapered. Adjust wedges by
positioning smaller end to match wider
end.
(104) Adjust wedges (119) as needed, under
Poly Tube Clips (118) and on Bucket
Cylinder (115) until Poly Tube (36) is
level.
(105) Install two Runners (121) on Guide
Rod (114) with two screws (122).
(106) Tighten screws (122).
NOTE
Poly Tube should appear relatively
straight when functioning properly.
(107) Install Guide Rod (114) in Guide Rod
Bracket (120) with Runners (121) aligned
with Poly Tube (36).
(108) Attach Hose Clamp (123) and Belt
Clip (124) to end of Bucket Cylinder
Ram (125).
4-62
Previous Page
