TM 11-5860-200-12
3-5. Checking Unpacked Equipment
a. Inspect the equipment for damage incurred during shipment. If the equipment has been damaged, report the
damage on SF 364, Report of Discrepancy.
b. Check the equipment against the packing slip to see if the shipment is complete. Report all discrepancies in
accordance with the instructions in TM 38-750. The equipment should be placed in service even though a minor
assembly or part that does not affect proper functioning is missing.
c. Check the equipment for modification. Equipment which has been modified will have an MWO number on front
panel, near the nameplate.
d. Check to see whether all current MWO's have been applied. (Current MWO's applicable to equipment are listed
in DA Pam 310-1.)
3-6. Unpacking the Electronics Assembly, Control Panel, or Technical Manual (fig. 3-2)
a. Release pressure equalizer valve (3).
b. Unhook latches (2) securing transit case lid (1).
c. Lift transit case lid (1) from base (4).
d. Lift component, as required, from case.
e. Replace lid (1) on base (4), and secure latches (2).
Figure 3-2. Unpacking Electronics Assembly, Control Panel, or Technical Manual.
3-3
Previous Page
