TM 11-5860-200-12
b.
Removal and replacement of code switch lamps (fig. 3-18).
(1) Remove control panel from aircraft (para 3-18).
(2) Remove four screws (1) that secure access cover (6).
(3) Remove access cover (6) and gasket (5).
(4) Loosen lamp contact screw (2) and turn lamp contact (3) to side.
(5) Remove lamp (4) from code switch and install new lamp in place.
(6) Turn lamp contact (3) to lamp base (4) and tighten screw (2).
(7) Carefully replace gasket (5) on control panel and install cover (6) in place.
(8) Install four screws (1) that secure access cover (6) in place.
Figure 3-18. Removal and Replacement of Code Switch Lamps.
3-29
Previous Page
