TM 11-6625-2685-23
3-10. Cleaning Laser Simulator Lens
Isopropyl alcohol is flammable in varying degrees. Use in well ventilated area, away
from sparks or open flame to prevent injury to personnel.
Do not touch lens with bare fingers. Skin oils will damage optical surface.
Clean lens with a cotton swab moistened with isopropyl alcohol.
3-11. Removing Laser Simulator Cover Assembly (fig. 3-4)
a. Remove screws and washers (2, 3).
b. Carefully remove cover assembly (1).
3-12. Installing Laser Simulator Cover (fig. 3-4)
a. Carefully place cover (1) in position.
b. Install the screws and washers (2).
EL8TV007
Figure 3-4. Laser Simulator Cover Assembly.
3-11
Previous Page
