TM 11-6625-2685-23
CHAPTER 2
ORGANIZATIONAL MAINTENANCE
Section 1. REPAIR PARTS, SPECIAL TOOLS, TEST, MEASUREMENT, AND
DIAGNOSTIC EQUIPMENT (TMDE); AND SUPPORT EQUIPMENT
2-1. Common Tools and Equipment
For authorized common tools and equipment refer to the Modified Table of Organization and Equipment (MTOE)
applicable to your unit.
2-2. Special Tools, TMDE, and Support Equipment
Refer to the Maintenance Allocation Chart (MAC), Appendix B, for special tools or equipment that are required for
organizational and direct support maintenance.
2-3. Repair Parts
Repair parts are listed and illustrated in the repair parts and special tools list (RPSTL) TM 11-6625-2685-23P.
Section Il. SERVICE UPON RECEIPT
2-4. Unpacking
a. Press the automatic valve core located on the side of the transit case.
b. Unhook latches securing lid and lift lid up.
c. Remove the laser simulator and alignment fixture.
2-5. Checking Unpacked Equipment
a. Inspect the equipment for damage. If the equipment has been damaged, report the damage on SF 364,
Report of Discrepancy (ROD).
b. Check the equipment against the packing slip to see if the shipment is complete. Report all discrepancies in
accordance with the instructions in
service even though a
minor assembly or part that does not affect proper functioning is missing.
c. Check the equipment for modifications. Equipment which has been modified will have the
number on
the front panel near the nameplate.
d. Ensure that all currently applicable
have been applied. (Current
applicable to the equipment
are listed in DA Pam 31
If equipment is not to be used within a thirty (30) day interval, remove battery to prevent
corrosion to equipment.
e. Install battery according to paragraph 3-7.
2-1
Previous Page
